GEOMET-500 static test bench for setting variable turbine geometry

Manufacturer: VTM Group
11151.91 € incl. VAT
9066.59 € excl. VAT
Not available
Have a question? Call a specialist +48 513 418 939 Monday–Friday: 8:00–17:00

About product

Geomet-500: the most affordable and innovative calibration stand on the market for variable geometry turbochargers (VNT)

Geomet-500 is a professional stand for adjusting VNT/VGT turbochargers. It lets you restore factory parameters quickly and repeatably after replacing the cartridge (CHRA) or the actuator. For turbo workshops and remanufacturers, this means higher repair quality, less working time per turbocharger and fewer complaints.

What your workshop gains

  • Elimination of overboost and underboost. You set the end positions of the nozzle ring vanes precisely, because they are the most common cause of poor vehicle performance after a repair.
  • Adjustable actuator rod length. You set the exact moment at which the airflow control mechanism operates.
  • Setup cycle under 5 minutes. More turbochargers pass through your workshop in the same amount of time.
  • Low start-up cost and fast return on investment.
  • No oil system. No monthly maintenance costs.

Three tests in one stand (two of them unique on the market)

  • Test 1: end positions (open / closed). When a vehicle has overboost or underboost, check the turbocharger’s end positions right after removal. You can also adjust it so the turbo builds boost earlier.
  • Test 2: graph. After remanufacturing, compare the entire operating range of the variable geometry with the original. The graph shows at which point a problem occurs and whether the turbo builds boost too late. Finding the turbo in the database, the actuator (ACT) test and the full turbo test take about 2 minutes.
  • Test 3: variable geometry play. The machine opens the geometry halfway, then fully, closes it halfway, then fully, comparing the airflow at each point. The result is the percentage deviation from the norm.

Convenience and safety

  • Compact size. 1190 × 520 × 1730 mm, so you don’t need much workshop space.
  • No additional infrastructure. The compressor and air tanks are built into the machine, so you don’t need a separate installation.
  • Open working area. Suitable for any turbocharger, including oversized ones.
  • Vertical mounting. Easy access to the turbocharger during adjustment.
  • Magnetic adapter. Mounting a turbocharger takes approx. 10 seconds. The process arm also handles non-magnetic housings.
  • Air filtration system. Protects the turbocharger during operation.
  • Complete adapter set included in the price. The adapter design lets you make additional adapters yourself if needed.

Diagnostic versatility

ATP-1000 tester with cables

  • Operation with vacuum and pneumatic actuators.
  • N75 valve diagnostics, which simplify troubleshooting of the turbo system.
  • Diagnostics of electrically actuated turbochargers (when the stand is connected to an ATP-1000 or ATP-3000 actuator tester).
  • Calibration of the device by the operator in approx. 10 seconds, without calling a service technician.

Easy operation and a huge turbo database

Database of turbocharger parameters in GEOMET-500

The stand has a clear control layout that is quick to learn. The operator controls the airflow rate or vacuum value in real time. The device takes ambient conditions into account, so measurement errors are minimal.

The software works with a tablet:

  • the manufacturer’s cloud database contains over 7,200 turbocharger types and is updated daily,
  • you can also create your own database stored in the tablet’s memory.

Technical specification

Parameter Geomet-500
Required pneumatic system pressure 0.6 – 0.8 MPa
Max. vacuum pump capacity 180 m³/h
Dimensions (L × W × H) 1190 × 520 × 1730 mm
Weight (approx.) 250 kg
Power supply 220 V ± 10%, 1 Ph, 50 Hz ± 1
Power consumption max. 1.5 kW
Software Geomet-500
Floor requirements ordinary hard workshop floor

Complete solution, support and training

With your purchase you receive a full package: the equipment, adapters, software, operator training and technical support. The manufacturer runs a service center, and we, as the Polish distributor, help you choose the configuration and get it up and running.

Request a quote

Leave your inquiry and our account manager will contact you to discuss the details of the commercial offer.

📞 +48 513 418 939 📧 ecom@wiatreo.pl 📍 ul. Cygana 3, 45-121 Opole, Poland

Specifications

  • Manufacturer

  • SKU

    GEOMET-500

  • Condition

    New

  • Warranty

    12 months of manufacturer warranty

Delivery and Payment

Shipping
Payment

Similar Products

Not available
29803.48 € incl. VAT 24230.47 € excl. VAT
Not available
17795.46 € incl. VAT 14467.85 € excl. VAT